The pipe is a conduit formed by tubes whose function is to transport water or other fluids.Pipes are essential in any sanitation system, and depending on the type of installation, be it a home, company, office, or commercial place, different types of pipes are required; hence, choosing the right choice is very important to know the prices as well, you can get the best experts of pipe installation in Australia’s city accordingly their best price in Adelaide.

Depending on the materials, we find plastic, metal or polyethylene pipes, copper pipes being the most used pipes in sanitation networks since 1950. Over time, these types of pipes have been replaced by other types of pipes such as pipes. galvanized.

The Pipes can be made of: Plastic – Metal or Polyethylene.Among the different types of pipes depending on the material we find:

Stainless Steel Pipes

They are not used much; they are difficult to find due to their high economic cost.This type of pipe offers high resistance to corrosion caused by salt water, which is why it is used in marine equipment and in constructions near the sea.

Galvanized Pipes

This material helps prevent oxidation of the metal and increases resistance against corrosion. It is a type of pipe widely used for homes.Currently this type of pipes is being replaced by PEX pipes, much cheaper and just as resistant.

Copper Pipes

It is the most common type of pipe that can be found in homes. Copper is very resistant to corrosion and can withstand very high temperatures.

Copper is an inexpensive, light, durable, elastic material – it can be bent cold -, almost entirely recyclable and common in plumbing, gas and heating installations. It is proven that it does not lose its qualities over time, not even after being recycled. According to the Spanish Copper Information Center, “it maintains intact its physio-chemical properties and the same performance” after reuse.

Like plastics, copper does not suffer corrosion, its internal walls are smooth, it resists fire and high pressure, it does not deform in extreme heat and it offers good protection against contaminants in the domestic water supply: “they allow to inhibit the growth of bacteria, viruses and fungi, thus helping to improve the quality of the water we drink, “says the Center.

In short, the peculiarities of copper are very similar to those of plastic, although its defenders claim that it better withstands the passage of time and uncompensated dilation cycles. In addition, they ensure that it is easier to detect copper tubes and that the joints, by welding or by accessories, are more stable and durable. As for calcareous installations, they occur in both plastic and copper pipes, so it is necessary to use softeners in any type of installation.

Reticulated Polyethylene (PEX) Pipes

With great resistance to high temperatures, which is why they are highly demanded in boilers or water heating systems. This type of pipe has a whitish or cream color, and the material takes on a different color depending on whether hot (red) or cold (blue) water passes through the pipe.

POLYCHLORUNO Chlorinated vinyl (CPVC) Piping

It has a yellowish color, able to withstand high temperatures and is used to transport water at high pressure.They are not used to transport hot water; the high temperature could deform the pipe.

PVC Pipes

They are not used to transport hot water since high temperatures could deform the pipe. It is used for cold water risers and for the evacuation of rainwater and wastewater.

Once the different types of water pipes that exist in the market are known, safety, reliability and price are the three main characteristics to take into account when deciding on a certain type of material and another.


  1. 1 – The plastic pipe is made of recyclable material, inexpensive and resistant to abrasion and corrosion. In installations where hot water passes, PVC should be avoided, and polyethylene, despite being resistant to high temperatures, is inadvisable in areas where there are high concentrations of chlorine.
  2. 2 – The copper pipe can be obtained at very cheap prices. It is a durable, resistant and very handy material. It is used and gas installations and heating and plumbing.

All pipes, whatever the material, need proper maintenance to last over time. With the renovation of the plumbing system and the replacement of the old water pipes, an improvement in the pressure of the home or workplace will be achieved.

When to Replace Pipes

To find out if the pipes that channel the water need to be changed, just observe the state of conservation of the visible parts of the pipes. If it is not optimal, the installation will have to be renewed to avoid possible leaks and leaks.

When the pipes are covered, they will need to be replaced if you notice that the tiles or the paint on the wall begin to peel or there is moisture in places where the pipes run.

However, when the pipes pass through walls, they must do so through bushings, the dimensions of which must allow the expansion of the pipes themselves. Covers can also be placed on pipes that are embedded or buried. These covers should be made of insulating material to protect against thermal changes or minimize the consequences of a leak.

On the other hand, the flow of the tap can also be a tell-tale sign that the pipes are not in adequate condition, since if there is little flow, there may be a crack in the route.

By TS Newswire

TS Newswire is a PR DIstribution Agency.

Leave a Reply

Your email address will not be published. Required fields are marked *